How To Repair Your Tires:
HOW TO REPAIR YOUR TIRE | ||
|
|
|
1. Remove Object That Caused Puncture. Take care, as residual air will escape under pressure | 2. Apply lubricant to the spiral shaft of the reamer tool. This will help to probe the hole and temporarily separate the steel belts | 3. Insert the reamer into the puncture hole and push in whilst rotating the handle to clean our the hole. Re-inflate tire to help with insertion of string |
|
|
|
4. Thread the repair string through the eye of the insertion tool until equal parts are either side of the tool. | 5. Firmly push the insertion tool and string into the tire, A small amount of the string should still be visible (5-10mm only) | 6. Cut-off remain string flush with the tire treads. |
NOTE: Re-inflate the tire to the recommended tire pressure and check for leaks. | ||
